Using Sunlight to Make Hydrogen

New photocatalyst for hydrogen generation works by irradiation with visible light.

Published: 24-May-2005

N id=intelliTxt>"Everything depends on the catalyst," explains Akihiko Kudo of Tokyo University of Science. "To make the system commercially viable, the catalyst must use sunlight efficiently." In fact, there are a number of photocatalysts that split water upon irradiation with UV light; this leaves a large portion of the sunlight unused, however, because nearly all of these catalysts cannot make use of the visible portion of the spectrum. Kudo's team has now developed a new catalyst that works when irradiated with visible light.

Why is it so hard to develop the "perfect" photocatalyst? Light particles are tiny packets of energy. When they hit a light-sensitive semiconductor, they transfer their energy to its electrons. Such excited electrons can escape from their atoms if they have enough energy. The electron then goes from an energy level called the valence band up to the conducting band. The electron leaves a "hole" in the valence band; these holes can formally be treated like a positively charged particle. Between the valence and conducting bands lies a forbidden zone, the "band gap".

This energy difference must correspond to the wavelength of the light in order for it to be absorbed effectively. Using the right combination of doped semiconductors, the scientists were able to put together a material with the right band gap. Their catalyst is a solid solution of zinc sulfide, copper indium sulfide, and silver indium sulfide (ZnS–CuInS2–AgInS2). When loaded with ruthenium metal, the result is a highly active photocatalyst with a significantly broader wavelength absorption.

The electrons and holes produced by the light must be taken up by the solution at the catalyst surface. The photocatalyst has to possess surface reaction sites on which the electrons and holes can take part in chemical reactions such as hydrogen production. This works when sulfides (S2–) and sulfites (SO32–) are present in the solution as sacrificial reagents, which irreversibly absorb the holes. The positively charged hydrogen atoms take up the electrons and form hydrogen gas.

"If this works in practice," says Kudo, "hydrogen could be obtained by using unwanted side-products from chemical factories and power plants: hydrogen sulfide and sulfur dioxide are sources of sulfides and sulfites."


LA couple lease Honda FCX fuel cell car in a grandiose experiment to demonstrate feasibility of the technology, except the local fire department won't let them use the hydrogen home refueling station Honda installed.

The eP-Ice Bear ice resurfacer is ideal for indoor use due to its zero-emissions powertrain that produces only water as a byproduct.

Controlled Hydrogen Fleet and Infrastructure Demonstration and Validation Project will include two other field test sites in California.


blog comments powered by Disqus